• PRODUCTS

300KW YC gas generator brushless China brand engine all day running

300KW YC gas generator brushless China brand engine all day running

300kW YC biogas generator with brushless engine, stable all-day running, 400V/50Hz output, and real-time control for reliable power.
WhatsApp: +86 15964012800
E-mail: info@x-precision.com
Inquiry Now
Product Details

About this item

•300kw gas generator set, dimensions: 3000×1050×1700 (L×W×H mm), unit weight: 2800kg. 

• YC gas engine is used as the power source, and it is equipped with  high-quality generator. This generator set uses cutting-edge technology Nongguangli, single-point injection, multi-point injection system, etc. 

• With the high-quality control module, it can monitor the combustion status, knock detection, complete system failure detection,etc. in real time, providing a solid foundation for stable operation. 

• The generator is equipped with a dry air filter, gas filter, lubricating oil filter, starter motor, and a self-charged generator. The high-strength bending base can be used for a long time without deformation to ensure stable operation of the unit. 

• The warranty period of the generator set is: 12 months after the acceptance of the unit.

UNIT PERFORMANCE

1. The design standard of the biogas unit is 300kW/375kVA, the voltage is 400V, the working frequency is 50Hz, and the power factor is 0.8 (lagging). The biogas engine can work in different methane gas concentration ranges (50-97%) or gas with the same calorific value, producing 100% electricity.

2. For the generator set running at normal operating temperature, the voltage, frequency change rate and engine recovery time conform to the ISO8528-5 standard, that is, to meet the 25% stepwise sudden load at the beginning, from the 25%-60% load stage Suddenly add 15% of the rated load, add 10% of the rated load from the 60%-80% load stage, and withstand 25% of the sudden load drop.

Gas requirements:
  Fuel type       Biogas
  Intake pressure       8Kpa-15Kpa, pressure change rate ≤1Kpa/min
  Methane content        ≥55%
  Low calorific value (LHV)        ≥25MJ/Nm3
  Impurity particle size        ≤5μm, content ≤30mg/nm³
  Sulfide        ≤50mg/Nm3
  Intake air temperature        ≤40℃
  Moisture content        ≤40g/nm3

Note: Demineralized water should be used for the high and low temperature cycles of the engine, and the cooling water should be slightly alkaline clean water, and must not contain corrosive compounds such as chloride, sulfate or acid. The main index requirements are as follows:

Hardness 0.7~5.3me/L
Chloride ion content <150mg/L
PH value7~8.5


Product Inquiry

If you are interested in our products, please fill in the message below to contact us and get a quote!

We will get back to you as soon as possible!

Submit